B0421S07A Plain Hemmer1/4" / Babylock Coverstitch/Evolve/Ovation/Gloria

B0421S07A Plain Hemmer/ Babylock Coverstitch/Evolve/Ovation/Gloria

• For cover-stitch machines.

• Evolve (BLE8W-2)
• Evolution (BLE8W-2)
• Ovation(BLE8)
• Our plain hemmer attachment was designed to guide the fabric into a perfectly straight hem without any pre-project pressing.
• These foot creates a 1/2, 1/4'' hem. You'll be amazed by the professional results. This foot was created for the Evolve and cover-stitch machines.

Stitches Used:

• Chain Stitch - C1 Needle Position
• Narrow Left Cover Stitch -C1 - C2 Needle Position
• Width Cover Stitch - C1 - C3
• Triple Cover stitch -C1- C2- C3
• Sewing speed : Moderate to slow.

FABRICS :

• Firm broadcloth , trigger , it. wt. denim, it. wt. polar fleece , sweatshirt fleece.

INSTRUCTION :

• Stitch Length : 3-4
• Cutting Blade : Disengaged "LOCKED"
• Upper Looper: DOWN
• Sewing Table : On

1. Secure attachment to table with guide fixing screws .
2. Turn under 1/2 inch (for 1/4 turn under 1/4 inch) and press with iron .
3. Raise presser foot. Slide fabric into attachment with wrong side of facing up, turning up and over to the left .
4. With a sewing awl , slide folded fabric under presser foot to the needle .
5. Lower the presser foot . turn the hand wheel 3-4 times to secure the fabric .
6. Align the attachment with the needle to envase the fabric edge .
7. With the right hand keep hem turned while left hand ids guiding folded fabric into hemmer .

• When hemming polar fleece or sweatshirt fleece , turn fabric one time .
• Do not attempt a double roll ( fabric does not ravel )