Janome Darning Foot with Plate for DB Hook Models 767409012 (Original)

Janome Darning Foot with Plate for DB Hook Models 767409012

Part No. 767-409-012

Machine Setting:

• Thread tension: 4-5
• Stitch length: any
• Foot pressure: 3-5

1. Insert the 2 pins (A & B) on the darning plate into the holes of the needle plate.
2. Attach the Darling Foot to the presser bar with the lever (C) over the needle clamp.
3. Set the speed control slider at the leftmost position (Max. 800 s.p.m) and start sewing.

Note: Use the needle #14 and quilting thread.

• With this attachment, Janome 1600P-QC is able to sew Free motion stitches, Embroidery and finishes the quilting stitches easily.
• Speeds of 1,600 stitches per minute make this the fastest machine on the market.
• 9" x 6" to the right of the needle gives an extra wide work area for large quilts.
• The automatic thread cutter cuts top and bobbin thread at the push of a button takes away the hassle to trim bottom thread, when sewing on bigger piece of quilts.
• The knee lift offers a full range of adjustment so you can free up your hands for fabrics alignment, and not worrying about lifting the presser foot. 
• Compatible:
  Semi Industrial machines Juki TL2200QVP mini, TL2200QVP mini, Juki TL98P
  Janome HD9,
  Janome 6700P
  Juki DDL7000A, Juki DDL8000A
  Juki DDL900B, Brother DB series,
  Juki DDL series 5550, 550N, 7000A, 8000A, 900A, 900B, 9000C,
  Zoje lockstitch Machines,
  Brother S7200 series,
  Brother S7100A series,
  Brother PQ15000S semi industrial ,
  Jack Industrial Machines,
  Singer Lockstitch Industrial Sewing Machines,
  Typical Lockstitch Industrial Machines, etc.
  Nisho Lockstitch Industrial Machines
  Techsew Lockstitch Industrial Machines

Check compatibility at contact@sewing.sg or Contact / WhatsApp: +65 6776 3253