B5002T20A Open Toe Foot/ Babylock/ For Overlock & Coverstitch- for models Evolve, Evolution, Ovation, Gloria
Presser Foot

B5002T20A Open Toe Foot/ Babylock/ For Overlock & Coverstitch- for models Evolve, Evolution, Ovation, Gloria

Availability: In Stock
  • Vendor:Babylock
$94.20

Babylock Open Toe Foot for Overlock & Cover-Stitch

  • Original parts for Babylock models:
    • Evolve (BLE8-2)
    • Evolution (BLE8W-2)
    • Ovation (BLE8)
  • This serger foot has a wide opening in the front that makes it perfect for projects that require extra visibility such as aligning stitching lines on hems and decorative cover stitching.
  • The wide opening in the front of this foot makes it perfect for projects that requires extra visibility such as aligning stitching lines on hems and decorative cover stitching.
    • Stitching Type : 2, 3 or 4-Thread Overlock
      Single Chain, Double or Triple Needle Cover-Stitch
    • Needles: Overlock 1, 2 or 3
      Cover/Chain 1,2 or 3
    • Stitch Width : Any
    • Stitch Length : Any
    • Upper Knife : Engaged or Disengaged
    • Differential Feed : 0, 6 to 2
    • Sewing Speed : Normal
  • The red marking on the toe of the foot are seam line guides. they indicate the needle position to help guide your fabric for accurate seaming.

TO RELEASE:

  1. Raise the presser foot lever.
  2. Lower the cutting blade.
  3. Raise the needles to the highest position.
  4. Push the presser foot release lever located at the back of the presser foot.
  5. Carefully turn the presser foot clockwise 90 degrees.
  6. Slide the presser foot to the rear to remove.

TO REPLACE:

  1. Raise the presser foot lever.
  2. Lower the cutting blade.
  3. Raise the needled to the highest position.
  4. Slide the foot from the left to right.
  5. Align the bar of the foot with the groove in the holder.
  6. Lower the presser foot lever to snap into place.

    Frequently Asked Questions (FAQs)

    Have a Question?

    Be the first to ask a question.

    Ask The Gurus