Babylock Curve Foot for Overlock & Cover-stitch
Original parts for Babylock model:
- Evolve (BLE8W-2)
- Evolution (BLE8W-2)
- Ovation(BLE8)
- BLCS
- Since this curving foot is short and has a flat sole, it is good for stitching curves and sewing over cross seams.
- The curving foot's short size is also good for sewing around cuffs, necklines and children's wear using the cover stitches.
- Its tape slot is wide enough for attaching reinforcement tape, such as twill tape at the shoulder seams, using very little effort.
To Release the Presser Foot:
1. Raise the presser foot lever
2. Lower the cutting blade
3. Raise the needles to the highest position
4. Push the presser foot release lever located at the back of the presser foot holder
5. Carefully turn the presser foot clockwise 90 degrees
6. Slide the presser foot to the rear to remove
To Replace the Presser Foot:
1. Raise the presser foot lever
2. Lower the cutting blade
3. Raise the needles to the highest position
4. Slide the foot from the left to right
5. Align the bar of the foot with the groove in the holder 6. Lower the presser foot lever to snap into place
- Notes:
- This curving foot does not work with using the differential feed while sewing
- Also this foot will not produce chain-off using the chain stitch.