BLE1-FEET/Creative Serger Accessory Feet
Presser Foot

BLE1-FEET/Creative Serger Accessory Feet

Availability: In Stock
  • Vendor:Babylock
$183.30

BLE1AT-FEET/Serger Accessory Feet Package.

Guarantee Fit for Babylock Sergers.

For Babylock Serger Models:
  • Eclipse: BLEISX, BLEIDX, BLEILX
  • Imagine: BLEIAT series
  • Enlighten BLE3ATW series
    Contains Serger Feet:
    • BLE - BLHFS: blind hem
    • BLE - BF: beads & pearls
    • BLE - CF3: cording, 3mm
    • BLE - CF5: cording, 3mm
    • BLE - EF: elastic applicator
    • BLE - RF: ruffling
    ON FABRIC EGDE :
    • Needle : Right
    • Upper Knife : Engaged " UNLOCKED"
    • Stitch Selector : D
    • Stitch Type : 3-thread rolled
    • Stitch Width : M
    • Stitch Length : 3-4 Rolled Hem
    • Differential Feed : N-0.6
    FLAT LOCK - ON FOLD
    • Needle : Right
    • Upper Knife : Disengaged "LOCKED"
    • Stitch Type : 2 - thread rolled
    • Stitch Width : D
    • Stitch Length : 3-4 Rolled Hem
    • Stitch Selector : DåÊ
    • Differential Feed : N - 0. 6
    Elastic / Fishing Insertion
    • Needle :Both
    • Upper Knife : Engaged "UNLOCKED "
    • stitch Type : 4-thread rolled hem
    • Stitch Selector : A
    • Stitch Width : 7.5 mm
    • Stitch Length : 4
    • Differential : N
    Fishing Line Insertion
    • Needle : Right Needle
    Upper knife : Engaged "UNLOCKED"
    • Stitch Type : 3-thread rolled hem
    • Stitch Selector : D
    • Stitch Width : M
    • Stitch Length : 1.5 Rolled Hem
    • Differential Feed ; 0.6
    IMAGINE/ ECLIPSE
    • The imagine and eclipse have the convenience of snap -on presser feet .
    TO RELEASE :
    • Raise the presser foot lever . Raise the needles to the highest position, push the presser foot release button located at the back of the presser foot holder .
    • Remove the foot .
    TO REPLACE :
    • Raise the presser foot lever . raise the needles to the highest position , place the foot under the presser foot holder aligning the bar of the foot with the groove in the holder . lower the presser foot lifter to snap it back into place .

    SHIRRING / RIFFLING "G" FOOT
    ITEM NO: BLE-RF

    • Needle : Both
    • Upper Knife : Engaged "UNLOCKED "
    • Stitch Type : Balanced 4 thread over lock
    • Stitch Selector : A
    • Stitch Width : 7.5 mm
    • Stitch Length : 4
    • Differential Feed : 2

    BLINDHEM "H" FOOT
    ITEM NO : BLE - BLHFS

    • Needle : Right
    • Upper Knife : Engaged "UNLOCKED"
    • Stitch Type : 2 - thread over lock
    • Stitch Selector : B
    • Stitch Width : 5.0 mm
    • Stitch Length : 4 
    • Differential Feed : N (N-0.6 for liner fabrics)

    SHIRRING / RUFFING "G" FOOT
    ITEM NO. BLE-RF

    • Needle : Both
    • Upper Knife : Engaged "UNLOCKED"
    • Stitch Type : Balanced 4 - thread overlock
    • Stitch Selector : A
    • Stich Width : 7.5 mm
    • Stitch Length : 4
    • Differential Feed : 2

    PIPPING / CORDING FOOT

    "P3"= 3mm Cording Item No. BLE-CF3

    "P5" = 5mm Cording Item no. BLE- CF5

    • Needle : Both
    • Upper Knife: Engaged "UNLOCKED"
    • Stitch Type : Balanced 4 - thread over lock
    • Stitch Selector : A
    • Stitch Width : 7.5 mm
    • Stitch Length : 3
    • Differential Feed : N

    NOTE:

    • Insert fabric (b), to be ruffled, with right side up, under the guide.
      Insert fabric (a), not to be riffled, with right side down, in the guide.
    • Sew a test to find ruffling ration for your particular fabric weight.
      The thicker the fabric the less gathering you will have. 

        Frequently Asked Questions (FAQs)

        Have a Question?

        Be the first to ask a question.

        Ask The Gurus