B0421S12A Belt Loop Binder 3/4" – Babylock Cover-Stitch (Evolve / Evolution / Ovation / Goria)
- Original accessory compatible with Babylock models:
- BLCS
- Evolve (BLE8W-2)
- Evolution (BLE8W-2)
- Ovation (BLE8)
- Despite its name, this binder offers multiple applications exclusively designed for Evolve and Cover-Stitch machines.
- Perfect for creating belt loops, straps, drawstrings, decorative trims, and purse handles.
- Automatically folds and prepares bias strips, eliminating the need for manual pressing and folding.
Type of Application:
Ideal for making belt loops for garments and various sewing projects.
Stitches Used:
- Triple Cover Stitch: C1–C2–C3
- Wide Cover Stitch: C1–C3
- Sewing Speed: Moderate to Slow
Lightweight Woven Fabrics – Bias Cutting Instructions:
- Stitch Length: 3–4
- Cutting Blade: Disengaged (Locked)
- Upper Looper: Down
- Sewing Table: On
Cut Bias Fabric Strips:
- 3/4" Folder – Cut fabric to 7/8" (22mm) width
- 1-1/2" Folder – Cut fabric to 1-5/8" width
Note: Strips must be cut precisely to the recommended width, even if wider than the attachment measurements.
Instructions
- Feed the bias strip (right side facing up) into the attachment.
- Pull the strip through to the needle and under the presser foot.
- Turn the handwheel 3–4 times to secure the initial stitches.
- Align the attachment with the needle position to ensure even folding and stitching.
- Ensure the stitch is centered within the belt loop.
- Leave approximately 3 inches of extra bias strip at the start and end for trimming after completion.
