Skip to content

B0421S02A Double Fold Bias Binder ( 36mm) for Babylock Cover-stitch/Evolve/Evolution/Ovation/Gloria

Save 30% Save 30%
Original price $99.00 SGD
Original price $99.00 SGD - Original price $99.00 SGD
Original price $99.00 SGD
Current price $69.30 SGD
$69.30 SGD - $69.30 SGD
Current price $69.30 SGD
Options: B0421S02A Double Fold Bias Binder (36mm) for Babylock Cover-stitch/Evolve/Evolution/Ovation/Gloria

Babylock Double Fold Bias Binder for Overlock & Cover-stitch

  • Original parts for Babylock model:
    • Evolve (BLE8W-2)
    • Evolution (BLE8W-2)
    • Ovation (BLE8)
  • This double fold bias binder will turn fabric strips into binding and attach it to project edges all in one step.
  • This attachment is exclusively for the cover-stitch and Evolve, and is perfect for curved edges, collars, and necklines on knit or woven fabrics.

For 1 - 1/2
STITCH USED :

  • Chain Stitch - C3 Needle Position 
  • Naroow Right Cover Stitch : C2 - C3
  • Type Application : Binding the edge of projects.
  • Fabric useed : Light weight to medium weight woven fabrics cut on bias.

FOR 1-1/8 inch Binder: 

STITCH USED :

  • Naroow right cover stitch C2-C3
  • Chain Stitch - C3 Needle Positon
  • Sewing Speed : Slow to moderate

INSTRUCTION :

STITCH LENGHT : 3-4

  • Upper Kinfe : Disengaged " LOCKED "
  • Upper Looper : Down
  • Sewing Table : On

BAISE STRIP CUT SIZE :

1-1/ 8 inch Binder:

  • Cut 1-1/8 inch bias from fine fabric such as calico , muslin etc.
  • Cut 1 inch wide for medium weight fabric such as trigger , it wt. denim

1-1/2 inch Binder :

  • Cut 1-3/9 inch for fine fabrics such as calico, muslin, etc .
  • Cut 1-1/4 inch wide for medium weight fabrics such as a trigger, it.wt.denim.

TEAT WITH FABRIC STRIP TO MAKE SURE OF CORRECT WIDTH OF BIAS .

  1. Secure attachment to table with guide fixing screws.
  2. Cut fabric strip to size needed.
  3. Raise presser foot . with the point of the bias strip, place strip into attachment.
  4. use tweezers to feed the strip into the attachment.
  5. Place the folded bias up to the needles and under the presser foot .
  6. turn the hand wheel 3-4 timed to secure the stitching in the fabric.
  7. Place the fabric that is to be bound into the slot of the attachment. Place in the folded bias in the front of the presser foot .
  8. Loosen the guide fixing screws and move the attachment right or left to align the attachment with the needle position.
  9. Sew test for proper alignment before sewing on the project.